Paint calculator

Litres and packs for the walls and ceilings you choose, after measured doors and windows, with primer and putty.

Paint calculator (paint kitna lagega)

Rooms and measured doors and windows in; litres, packs, primer and putty out. Choose which surfaces get paint, primer and putty, use the coverage printed on your own product, and enter the pack sizes your shop sells.

The figures already filled in are an example. Replace them with your own measurements; the result updates as you type.

Rooms

Length × width × height of each room.

Doors and windows (measured)

Width × height of each opening and how many; they are taken off the walls.

Which surfaces?
WallsCeilings
Paint
Primer
Putty
Paint

Pack sizes your shop sells (3.64 L gallon and 14.56 L drum are filled in). The plan leaves the least paint over, then uses the fewest packs.

Primer and putty

Common questions

How many square feet does a gallon of paint cover?

Read the label: emulsions are typically rated around 350–450 sq ft per 3.64 L gallon for one coat on smooth plaster, which is about 100–120 sq ft per litre. Textured or rough walls take more, and the first coat on fresh putty always drinks more. Enter the figure for your product.

Do I need primer and putty?

On new plaster, usually yes: putty gives a smooth surface and primer seals it so the paint does not soak in unevenly. Many people putty only the walls; tick the surfaces you will actually treat. Repainting a sound painted wall often needs neither, just washing and a light sanding.

Gallon or drum?

A drum (14.56 L, four gallons) is usually cheaper per litre. Enter both prices and the calculator shows the cost of the pack plan; buy drums for the main colour and gallons for accent walls and trims. Keep the batch numbers the same for one room.

When can I paint new plaster?

Wait 3–4 weeks after plastering so it dries through. Paint on damp plaster peels and shows salt patches within months.

More free tools

  • House builderDraw your rooms on your plot, drag things into place, then tap anything to see the tiles, paint, cement and wire it needs.
  • Society legal statusSearch any housing society in Islamabad or Rawalpindi and see whether it is approved, NOC in process, or illegal, with the approved area.
  • Plot price checkPick the society, phase, block and plot size to see the dated price references we have, with their source — or a clear note when there are none.
  • Cost by plot sizeQuantities for a house on your plot, an illustrative range at sample rates, or a total at your own rates.
  • TilesFloor or wall tiles and boxes, with waste, bedding or adhesive, at your prices.
  • Daily cement mixBags, rehri and tasla for today’s plaster, brickwork, bedding or PCC, batch by batch.
  • Bricks & blocksBricks or blocks from their real size and joint, with mortar or adhesive.
  • Concrete & steelConcrete for a slab, beam, column or footing, and steel from the bars on your drawing.
  • WiringMetres and coils per cable for the routes your electrician has planned.
  • Cost estimateA line-by-line budget at the rates you are quoted, with unpriced lines listed.
  • ChecklistFourteen stages: what to buy, what to check with the mistri, and what to photograph before it is covered.

Want a builder to check the numbers?

Blackfire Real Estate & Builders builds on labour or contract rate in Islamabad and Rawalpindi and does one-off site checks for people building themselves.

0371-7581455

All quantities on this site are estimates for planning and buying. Site conditions, workmanship and brands change the real figures. Structural sizes and reinforcement must come from your approved drawings and engineer.